In my last post, I discussed how to make a comic that would be printed on gicleels.
The process for making a comic is fairly straightforward.
All you need is a grid of paper (which can be anything from paper towel to cardboard to a standard sheet of paper), some gicleel paper (the kind you can buy at your local hardware store) and some watercolor paper.
In this post, we’re going to look at how to do it using watercolor.
The first step is to get a paper towel or cardboard, and put it on top of a flat surface, like the bottom of a bathtub or the side of a chair.
Next, draw lines on the paper towel, and then cut it to make the shapes.
Next you want to add some watercolors on top, and add more watercolor onto top.
When all the watercolours are added, you can start painting!
To do this, place the paper towels onto a flat tray, like a large bowl.
Once the paper is wet, place your watercolour paper in the tray, and use a paintbrush to brush the water onto the paper.
This will make the paper feel dry.
Now it’s time to add the ink.
This can be done by using a marker, a brush, or a paint roller.
You can do this with any paintbrush or marker, but it is preferred to add watercoloured ink directly onto the watercolour paper.
Once you’ve got your watercolour on the water paper, paint your comic with a watercolour marker or a watercolor brush.
If you are using watercolour markers, you need to add a small amount of watercolouring ink onto the marker.
This ink will cover the whole page of your comic.
This is called “damping”, and it can make the whole comic feel more solid.
For this, you will need a paint brush.
The best paint brushes for this are the Parker Mamba, which is available at most art supply stores.
These paint brushes are incredibly light, and will leave a very nice wet-looking finish on paper.
Once you have your water coloured ink, it’s now time to paint the comic with the ink on the marker or brush.
It is a good idea to use a watercoloring brush with a little bit of water on the tip to get the desired effect.
Once all the ink is on the comic, you’re ready to start adding the comic page.
To add the comic pages to your comic, lay the comic sheets out on your surface.
The comic pages should be spaced about a centimetre apart, with the pages closer together to make it easier to get each comic on the page.
The spacing of the comic covers will be based on the size of the pages.
So if your comic is 200 cm by 200 cm, your comics pages should overlap each other at about 50 centimetres.
To create a comic page, place a pencil on the back of a ruler, or with a pencil and paper or a marker.
Make sure to mark out a line that goes across the page you want, and draw it down with your pencil.
Use the ruler to draw a line across the comic you want onto the page, and make sure to make sure that the line is parallel to the page itself.
To make the comic appear bigger, you want your comic pages on the same page, so line up the lines.
It will look something like this:Now, you are ready to begin painting.
Paint your comic page with a brush.
You want to do this because you want the paint to be a nice dark brown colour.
If the colour you choose is a light brown, you’ll have a darker background to your pages.
The only problem with a dark background is that it makes it hard to read.
So, make sure you get a dark colour for your comic on your comic strips.
When you’re done, paint the panels.
When done, you should have something like the following:Now that you have all your comic panels ready, you have to add them to your page.
To do so, you first need to paint all the panels on the front of your page, with a paint stick or paint roller (or both).
Then paint the sides and the bottom.
Make the pages look like this and use your watercolor ink to add any extra watercolOUR.
To add extra watercolour to your comics, you only need to mix a little of it on your water colour paper, then apply it with a small paintbrush.
It’s a good technique to use if you want a dark effect on your page or pages.
When you’re finished adding your comic comic pages, you may want to trim off some of the excess watercolour.
This could be done with a sharpie or a pen, but if you’re doing this on a comic strip, you could do it with your fingers.
So you should remove some excess watercolOU