This article was originally published in print edition on May 25, 2019.
Subscribe to the print edition today.
3D printers have a reputation for being difficult to set up, especially if you’re not a seasoned 3D print expert.
Even for those who have mastered the basics, the process can be time consuming.
So when a Canon 3D Printers manufacturer asked us to help them troubleshoot a new 3D printing model, we were delighted to do it.
To help us understand the issue better, we set up a quick Google Hangout session with Canon’s Product Manager, Adam Sauer.
The session went well, and Canon’s engineers were able to help us diagnose the issue.
The issue was a bit more complex than we anticipated.
The driver is supposed to be used to control a printer’s printing output, but Canon has yet to provide us with a driver for its printer models.
Luckily, the issue was solved by an older version of the driver.
That version had a couple of problems: it didn’t provide the driver for the Canon printer models we were using, and it didn�t automatically detect that the printer models had been upgraded.
That left us with an unsupported 3D printed model.
Fortunately, we found a workaround to the problem.
The workaround The solution to the driver issue we were trying to fix wasn’t a simple one.
The printer drivers are designed to run in the browser.
However, we had to use a different browser to view the printer model and control it.
The solution was to use the WebPrint SDK.
WebPrint lets you use your computer to control and display your printer.
If you�re not familiar with WebPrint, you can read a short introduction to WebPrint on the Canon Developer Blog.
We decided to use WebPrint for our 3D prints, but it didn.�t take long to find a WebPrint version for all of the Canon printers we were testing.
We downloaded the latest version of WebPrint from Canon�s Developer Center.
The WebPrint tool will allow you to control your printer remotely, and you can even send files to the printer.
You can see the WebView in action here.
It allows you to see the printer as a whole and inspect the prints you make.
In this video, you see the printing process in action.
If the printer is showing errors, it can be hard to see them because the printer can’t see the errors on its own.
That�s because the driver doesn�t know what the printer�s errors are.
The print settings of a printer can vary a lot based on the settings of the printer in the printer driver.
For example, if the printer has the default printing settings, it might not print properly.
If those settings are changed, it may print properly, but not always.
We set up our 3d printer to use that default settings.
We created a new WebPrint session to run our printer and print our documents.
We clicked the ‘Connect’ button to connect to the webPrint server and get started.
We waited a few seconds, and the printer connected.
When the printer opened, we clicked the printer label to show a list of available printers.
We selected our printer, then clicked the Print button.
We printed out our document and saved it in the same folder as the file we were working on.
The printing process didn�ts seem to be a problem.
We checked the printer again a few minutes later and the printing seemed to be working.
We also checked our printing settings and they looked fine.
The only problem with this workaround was that we didn� t see any errors while printing our document.
When we printed out the document, we didn’t see any issues with the printer and the print didn�trickled.
This was a problem because printing to a file on the web is a much slower process.
It takes several minutes for a file to finish processing.
However for a print to complete, it must complete all the processing that took place in the print process.
We had to wait a few more minutes for the print to finish and to print the document.
The last thing we needed to do was print our document again.
We could then print the file from the web, and we would see the print go through.
Unfortunately, we�re still not 100% certain that this works. If we don�t get any prints to print, we can still test the workaround.
The problem is solved with the workaround Adam created in his tutorial.
When you install the Webprint tool, you get the ability to see and edit your printer� print settings.
You also get the